Frigidaire EPTWFU01 Refrigerator Water Filter Replacement, 2 Pack

Six months goes by faster than most people plan for, and an expired filter doesn't announce itself until the water starts tasting off. This 2-pack keeps you ahead of that, built for Frigidaire refrigerators that take the EPTWFU01 filter (also labeled ULTRAWF or WF3CB), stripping chlorine, lead, mercury, and dozens of other contaminants out of the water before it reaches your glass or ice bin.

Specification

• Product Name: Frigidaire EPTWFU01 Refrigerator Water Filter Replacement, 2 Pack
• Fits Filter Codes: EPTWFU01, ULTRAWF, WF3CB
• Certification: NSF 42 certified
• Filter Capacity: Rated to 300 gallons per filter
• Recommended Change Interval: Swap every 6 months
• Filter Media: Coconut shell carbon
• Installation: No tools needed, low-profile fit

Special Features

• Two Filters, Three Labels Covered: EPTWFU01, ULTRAWF, and WF3CB point to one housing, so either filter in this pack fits whichever code your fridge calls for.
• A Full Year Without Reordering: At a 6-month swap schedule, this pack gets you through both halves of the year in one purchase.
• Sized for a Clean Fit: Flow rate and dimensions track closely with the factory EPTWFU01, so there's nothing to force into place.
• Two for Less Than Two Separate Orders: Buying the pair usually comes out cheaper per filter than ordering branded replacements one at a time.
• Coconut Shell Carbon Does the Work: This filtration media is chosen specifically for pulling chlorine taste, odor, and sediment out of the water.
• One Filter Covers Ice and Water: On most compatible setups, both the ice maker and the dispenser draw from this same filtered line.
• Stays Out of Your Way: The slim housing slides into the existing slot without needing any adjustment to your fridge's layout.

Cross-Reference Numbers

• EPTWFU01
• ULTRAWF
• WF3CB
• 241791601
• FPPWFU01
• PWF-1

Installation Instructions

1. Track down the filter housing, usually along the upper right interior wall or built into the base grille.
2. Give the old filter a quarter turn counterclockwise until it pops free.
3. Pull it out and set it aside.
4. Pull the protective cap off the new filter before putting it in.
5. Line the new filter up with the opening and push it into place.
6. Turn it clockwise until it locks in with a click.
7. Run 2 to 3 gallons through the dispenser before drinking, which clears trapped air and loose carbon.
8. Reset the filter light following your Frigidaire refrigerator's manual.
9. Set the extra filter aside somewhere cool and dry until it's due.

Compatibility Guide

• Frigidaire side-by-side refrigerators built for the EPTWFU01 filter
• Frigidaire French door refrigerators built for the EPTWFU01 filter
• Check your current filter's code or your fridge's model number against the list above before ordering