Frigidaire EPTWFU01 Refrigerator Water Filter Replacement, 1 Pack

The difference between flat tap water and a filtered glass usually comes down to a part most people never look at. This filter is made for Frigidaire refrigerators that take the EPTWFU01, also sold under the ULTRAWF or WF3CB labels, and it's designed to strip out chlorine, lead, mercury, and a long list of other contaminants before that water hits your dispenser or ice tray.

Specification

• Product Name: Frigidaire EPTWFU01 Refrigerator Water Filter Replacement, 1 Pack
• Fits Filter Codes: EPTWFU01, ULTRAWF, WF3CB
• Certification: NSF 42 certified
• Filter Capacity: Rated to 300 gallons
• Recommended Change Interval: Swap every 6 months
• Filter Media: Coconut shell carbon
• Installation: No tools needed, low-profile fit

Special Features

• Same Part, Different Labels: EPTWFU01, ULTRAWF, and WF3CB all describe the identical housing, so this filter installs wherever any of those three is called for.
• Built to the Original Footprint: Flow rate and sizing are matched closely enough to the factory EPTWFU01 that fitment isn't an issue.
• Costs Less Without Cutting Corners: Going compatible typically saves money over the branded option while keeping the same rated output.
• Coconut Shell Carbon Does the Work: This filtration media is chosen specifically for pulling chlorine taste, odor, and sediment out of the water.
• One Filter Covers Ice and Water: On most compatible setups, both the ice maker and the dispenser draw from this same filtered line.
• Doesn't Take Up Extra Room: The slim housing slides into the existing slot without needing any adjustment to your fridge's layout.

Cross-Reference Numbers

• EPTWFU01
• ULTRAWF
• WF3CB
• 241791601
• FPPWFU01
• PWF-1

Installation Instructions

1. Track down the filter housing, usually along the upper right interior wall or built into the base grille.
2. Give the old filter a quarter turn counterclockwise until it pops free.
3. Pull it out and set it aside.
4. Pull the protective cap off the new filter before putting it in.
5. Line the new filter up with the opening and push it into place.
6. Turn it clockwise until it locks in with a click.
7. Run 2 to 3 gallons through the dispenser before drinking, which clears trapped air and loose carbon.
8. Reset the filter light following your Frigidaire refrigerator's manual.

Compatibility Guide

• Frigidaire side-by-side refrigerators built for the EPTWFU01 filter
• Frigidaire French door refrigerators built for the EPTWFU01 filter
• Check your current filter's code or your fridge's model number against the list above before ordering